update: on 05/01/2013
this problem is related to r8168 instead of a particular motherboard model so I changed this title.
ubuntu 10.04 or later version installs r8169 for my network card( motherboard mode: gigabytes H61M-S2V-B3).
this r8169 doesn't work correctly with my network card.. the typical scenario is time-out for everything..
fixing is simple..we use r8168 driver instead...
1: get r8168 drivers on website.. I use r8168-8.028.00
download link:
http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false
sometimes,,,we need another computer to download this driver and send it to the target via usb jumpdisk or cdrom. so make sure you have another computer if the target fails to get on line comletely.
2: put server install disc into cdrom and edit /etc/apt/sources.list (make a backup first) with nano
activate the cdrom repository.
3: sudo apt-get update
4: sudo apt-get install build-essential
5: sudo apt-get install linux-headers-`uname -r`
6: sudo fdisk -l (check your usb disk here)
7: mount /dev/sxxx /media/temp
8: enter r8168 dir and issue
sudo make all
9: sudo depmod -a
10: sudo nano /etc/modprobe.d/blacklist.conf add:
blacklist r8169
11: sudo nano /etc/initramfs-tools/modules add:
r8168
12: sudo update-initramfs -v -u -k `uname -r`
13: sudo reboot
network card should work from now on...
分享到:
相关推荐
ubuntu 下的xilinx cable usb 驱动源码包,需要编译安装即可。 详细教程请参考https://blog.csdn.net/qq_16069457/article/details/121269721
This bundle contains a modified CP210x driver for the 4.10.0 kernel (Ubuntu 17.04). It contains: - Support for the CP2102N NOTE: This driver is an example of how to perform GPIO operations within ...
开始修补WoL驱动程序,如下所示: $ sudo apt-get install -y wakeonlan$ git clone https://github.com/kairen/maas-wakeonlan-driver.git$ cd maas-wakeonlan-driver$ PATCH_DIR= " /usr/lib/python3/dist-...
You must install 'makeinfo' on your build machine makeinfo is usually part of the texinfo package in your distribution make: *** [dependencies] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/...
on Ubuntu run: ```sh sudo apt-get install mesa-common-dev ``` #### Disable Hunter If you want to install dependencies yourself or use system package manager you can disable Hunter by adding [-...
Install driver for USB-UART bridge converter on Linux Ubuntu12.04 Ubuntu下USB转串口芯片驱动程序安装,支持cp210x,pl2303等 Reference: Fixing the cp210x open - Unable to enable UART Error When you ...
Any distribution shipping a kernel >= 2.6.27 will have ath9k present but the ath9k driver on 2.6.32 is the oldest one recommended, anything older than that is completely unsupported. Below is a list ...
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.5.4-NAPI duplex=full firmware=0.13-4 ip=10.10.100.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s ...
After that we get into some more hands-on material such as how to install OpenBSD, how to partition our hard drives and checking to make sure our hardware is supported. There are chapters on securing ...
- Support more host OS to run on: - Include win64 native binary in the release. - Fixed failures on big endian hosts. - BIOS: Support for up to 2M ROM BIOS images. - GUI: select mouse capture toggle...
And This Driver also tesed on "kali-2.1.2" ,"ubuntu-mate-16.04-beta2" ================================================================================================================ How to Install: ...
lrwxrwxrwx root root 1970-01-02 10:18 driver -> ../../../../../bus/i2c/drivers/pcf8563 -r--r--r-- root root 4096 1970-01-02 10:18 modalias -r--r--r-- root root 4096 1970-01-02 10:18 name drwxr-xr-x ...
HOST_OS_EXTRA=Linux-3.13.0-24-generic-x86_64-with-Ubuntu-14.04-trusty HOST_BUILD_TYPE=release BUILD_ID=57513AA3 OUT_DIR= ============================================ rootroot@cm-System-Product...
SCGCQ00319423 Defect FreeBSD MegaCLI v8.05.02 does not detect controller when driver 5.504.05.00 is loaded SCGCQ00324031 Defect MegaCLI 8.04.07 output typos SCGCQ00324525 Defect MegaCLI: MFI_STAT_NOT_...